.bytecode

Well, we did the reverse engineering part, now we have to write a program for the VM with the instruction set described in the previous paragraph. Here is the program's functional specification:

  • the program must return "*"
  • sym.memory has to contain the string "Such VM! MuCH reV3rse!" after execution
  • all 9 instructions have to be used at least once
  • sym.good_if_ne_zero should not be zero
  • instr_P is not allowed to be used more than 9 times

Since this document is about reversing, I'll leave the programming part to the fellow reader :) But I'm not going to leave you empty-handed, I'll give you one advice: Except for "J", all of the instructions are simple, easy to use, and it should not be a problem to construct the "Such VM! MuCH reV3rse!" using them. "J" however is a bit complicated compared to the others. One should realize that its sole purpose is to make sym.good_if_ne_zero bigger than zero, which is a requirement to access the flag. In order to increment sym.good_if_ne_zero, three conditions should be met:

  • arg1 should be a negative number, otherwise we would return early
  • sym.written_by_instr_C should not be 0 when "J" is called. This means that "C", "AC", or "SC" instructions should be used before calling "J".
  • arg1_and_0x3f should be negative when checked. Since 0x3f's sign bit is zero, no matter what arg1 is, the result of arg1 & 0x3f will always be non-negative. But remember that "J" negates arg1_and_0x3f if arg1 & 0x40 is not zero. This basically means that arg1's 6th bit should be 1 (0x40 = 01000000b). Also, because arg1_and_0x3f can't be 0 either, at least one of arg1's 0th, 1st, 2nd, 3rd, 4th or 5th bits should be 1 (0x3f = 00111111b).

I think this is enough information, you can go now and write that program. Or, you could just reverse engineer the quick'n'dirty one I've used during the CTF:

\x90\x00PSAMuAP\x01AMcAP\x01AMhAP\x01AM AP\x01AMVAP\x01AMMAP\x01AM!AP\x01AM AP\x01AMMAP\x01AMuAP\x01AMCAP\x01AMHAP\x01AM AP\x01AMrAP\x01AMeAP\x01AMVAP\x01AM3AP\x01AMrAP\x01AMsAP\x01AMeIPAM!X\x00CAJ\xc1SC\x00DCR*

Keep in mind though, that it was written on-the-fly, parallel to the reversing phase - for example there are parts that was written without the knowledge of all possible instructions. This means that the code is ugly and unefficient.

results matching ""

    No results matching ""